Industrial-Grade Submersible Slurry Pumps for Extreme Environments
Engineered for high solids, abrasive slurries, and non-clog performance in demanding applications.
Industrial-Grade Submersible Slurry Pumps for Extreme Environments
When uptime is critical and failure is not an option, EDDY Pump delivers. Our submersible slurry pumps are specifically designed for the most demanding applications in mining, dredging, wastewater treatment, oil and gas, and heavy industry sectors. These units are not just submerged—they dominate the job below the surface.
Why Leading Industries Choose EDDY Pump
Unlike traditional centrifugal pumps, our patented design eliminates clogging, handles high solids content, and operates reliably in abrasive, corrosive, and viscous environments. Whether you need to pump sludge, sand, slurry, or gravel, EDDY Pump is the smart, long-term solution.
- Engineered for high solids and abrasive media
- Patented non-clog design for uninterrupted operation
- Electric and hydraulic drive options
- Capable of pumping up to 70% solids by weight
- Built in the USA with heavy-duty, field-tested materials
Key Features & Advantages
At the core of every EDDY submersible pump lies a patented, rotor-based design that generates a powerful eddy current, resulting in a highly efficient and low-maintenance pumping action. These pumps are uniquely designed to handle materials that conventional pumps cannot handle.
Top Performance Features
Non-Clog Vortex Flow Design
Our open rotor and recessed volute design creates a powerful eddy current that prevents clogging while allowing large solids, slurry, sludge, or debris to pass through easily.
Extreme Solids Handling
Pumps up to 11-inch solids without damage or downtime—ideal for high-viscosity, high-density materials like drilling muds, tailings, and biosolids.
No Critical Tolerances
Unlike centrifugal pumps, our design does not rely on tight clearances, which significantly reduces wear and extends the pump's lifespan.
Built Tough
Constructed using high-chrome or stainless steel, these pumps withstand intense abrasion, corrosion, and temperature fluctuations without compromising performance.
Reduced Maintenance
Minimal moving parts and no tolerance-dependent components translate to lower maintenance costs and fewer service interruptions.
Built for Demanding Industries
EDDY Pump’s submersible slurry pumps are trusted by companies operating in the harshest conditions across multiple sectors. Our solutions are not one-size-fits-all—they’re engineered for performance in specific industry applications.
Industries We Serve
Mining
Pump tailings, mineral slurry, and abrasive ores from deep pits or underground chambers. EDDY Pump excels in removing heavy slurry with high solids content while reducing maintenance in remote, hard-to-access areas.
Dredging
Whether it’s river dredging, harbor maintenance, or land reclamation, our pumps are designed to handle sand, silt, gravel, and debris, working continuously underwater without clogging.
Wastewater Treatment
Our submersible pumps efficiently handle thick sludge, grit, and biosolids, resulting in fewer blockages and less downtime in municipal and industrial treatment facilities.
Oil & Gas
Clean tanks, move drill cuttings, and handle viscous fluids and slurry waste with a rugged solution that performs in both onshore and offshore environments.
Construction & Tunneling
Pump bentonite, shotcrete slurry, or dewatering runoff from shafts and tunneling sites. EDDY pumps provide reliable performance in confined, wet, and unpredictable environments.
Chemical Processing
Transport corrosive, high-temperature slurries safely. Our corrosion-resistant models are specifically designed to meet the demanding needs of chemical plants and refineries.
Speak to an Engineer
If you need help with pump selection, sales or engineering support, call 619-345-5446.
Save $34000+ with EDDY Pump
EDDY Pump is purpose-built to lower your total life-cycle cost by eliminating the hidden expenses that come with traditional pump systems.
With its patented non-clogging design, the EDDY Pump operates without seals, bearings, or close tolerances—components that often cause breakdowns in centrifugal pumps—resulting in virtually zero maintenance requirements. This means no recurring costs for replacement parts, no unplanned downtime, and no labor-intensive repairs.
Technical Specifications
EDDY Pump submersible slurry pumps are available in multiple sizes and configurations to support a wide range of industrial pumping requirements.
General Technical Data:
- Pump Sizes: 2" to 12" and above
- Flow Rates: Up to 4,500 gallons per minute (GPM), depending on model
- Solids Handling: Up to 11 inches in diameter
- Drive Options: Electric (5 HP to 600 HP) and hydraulic (variable GPM/PSI ranges)
- Material Options: High-chrome steel, stainless steel, duplex steel
- Seal Types: Dual mechanical seals with hard faces for high abrasion resistance
- Power Configurations: Available in submersible, remote drive, and excavator-mounted options
Custom builds and accessories such as agitators, jetting rings, and cutter heads are available to meet specific application needs. Our engineers will assist in sizing and specifying the optimal solution for your project.
Slurry Pump Specs
Why Engineers Choose EDDY Submersible Slurry Pump
When engineers select a pump, they look for more than just specs—they need reliability, serviceability, and a return on investment (ROI). EDDY Pump delivers on all three.
Here’s why professionals in the field trust EDDY Pump
Patented Design
Our innovative technology outperforms centrifugal, diaphragm, and progressive cavity pumps in moving slurry.
Heavy-Duty Construction
All components are designed for industrial use, with wear-resistant metallurgy and precision manufacturing.
No Tolerance Issues
Pump efficiency is not compromised by wear, extending lifespan, and minimizing part replacements.
Proven by the US Military
EDDY Pump has passed the most rigorous performance evaluations and is actively used by the US Navy.
In-House Support & Service
From consultation to commissioning, we support your project every step of the way.
Speak to an Engineer
If you need help with pump selection, sales or engineering support, call 619-345-5446.
Whether your site needs continuous operation in corrosive fluids or intermittent heavy-lift pumping in abrasive environments, we’ve built a pump that keeps up.
Get a Customized Pump Quote
Receive a tailored solution based on your project’s requirements, application details, and budget.
Ready to Eliminate Downtime? Let’s Get Started
Whether you’re upgrading an existing system or specifying pumps for a new project, our team is here to help. From technical consultation to full customization, we deliver engineered solutions that work in the harshest environments.
Reach out today for:
- Tailored pump recommendations based on your application
- Engineering support and CAD drawings
- Fast quote turnaround and lead time estimates
- Product brochures and technical documentation
Speak to an Engineer
Tell us about your application and a pump specialist will respond within 24 hours.